| Model | DHI-ITC314-PH1A-TF2 | ||||
|---|---|---|---|---|---|
| Sensor Type | 1/3 inch CMOS | ||||
| Electronic Shutter | 1/3s~1/10000s, may be manual or auto adjust | ||||
| Min Illumination | 0.01Lux | ||||
| Day/Night | Electronic day/night switch | ||||
| Gain Control | Auto | ||||
| White Balance | Auto | ||||
| Image Compression Standard | JPEG | ||||
| Image Resolution | 2304×1296 | ||||
| Video Compression Standard | H.264 | ||||
| Video Output | 2-ch | ||||
| Video Bit Stream | Each channel support 64~5096Kbps | ||||
| Video Frame Rate | Each channel support 1~10 fps | ||||
| Video Resolution | Each channel support:main stream(2304×1296@10fps), sub stream(704×576@10fps) | ||||
| Plate Recognition | Support | ||||
| Parking Status Check | Support | ||||
| Parking Indicator | 7 types: red, yellow, blue, green, cyan, white and pink lights | ||||
| Remote Control | Via WEB remote control | ||||
| OSD Info Overlay | Support, may customize time, location, parking no. and parking status | ||||
| Watermark | Watermark and parity | ||||
| Record Mode | 0~3 pic/vehicle, can set | ||||
| Network Port | 2, RJ45 10M/100Mself-adaptive Ethernet port | ||||
| RS485 Port | 1 | ||||
| Lens Port | M12 (2.8mm lens) | ||||
| Alarm Output | 1-ch | ||||
| Alarm Input | 3-ch | ||||
| Power | DC wide voltage power supply, range: DC8V~DC26V | ||||
| Consumption | < 11 W | ||||
| Working Temperature | ﹣30℃~﹢60℃ | ||||
| Working Humidity | 10%~90% | ||||
| Dimension | ¢140 mm×111.2mm | ||||
| Weight | 700g | ||||
| Installation | Dome design, in-ceiling mount | ||||